Home Made Toy Car

Design thinking Process:

Discovery Phase: I had to interview a couple people. I interviewed my mom, my dad, my litlle brother, and some friends. I had to brainstorm some questions to ask my users in wich case was my litle brother, my mom, my dad, and my friends. using all the information i got from the interviews. i gathered all the ideas and started the interpretation phase.

Interpretation Phase: In this phase i had to find drivers and constraint, wich are things that my user needs, and things that will be chalenges while making the final product and the prototypes.

Drivers: Small, good mobility, balanced so it does not fall over, home found items. Constraints: Size, durability, mobility, sturdiness.

Ideation Phase: In the ideation phase, i had to brainstorm several ideas, first it was quantity over quality meaning no mater the quality of the drawings the important thing is to draw as much as i could. this part helped me get all my ideas onto small litle drawings, then i would show them to my user, finally using all of the ones my user liked i made one big detailed one.

Prototyping: For my prototype i made it on tinkercad. this was not my final product, this was just a prototype wich i would see how it would work and was basicaly a rough draft for my acual build. i also had to figure out how i would make that with common household ittems.

Suplies: Popsicle sticks, Scotch, Glue, 4 toy wheels sticks.

So the first step to create the toy car, you need to glue 3 sticks in a triangle form. It can be done with scotch tape or with glue, both work.

The next step is to scotch tape or glue your front wheels to the corner of the triangle, make sure that both wheels are the same size.

Aswell as step 2 now you need to glue or scotch tape the back wheels to the back part of the triangle, also make sure that both back wheels are the same size.