Hollow Keycap, Requires Only 1g of Filament.

by lilyclark in Living > Decorating

24 Views, 1 Favorites, 0 Comments

Hollow Keycap, Requires Only 1g of Filament.

b051ff478ba456916aefc283d685f07.png

This keycap is R4 and is only suitable for the first and second row.

Although it can be installed in other positions, the angle will differ from the original keycaps, affecting both feel and appearance.

Supplies

017a79b47aae813046703c49f96453f.png

0.12mm layer height, 3 walls, 15% infill

It is recommended to use PLA filament for printing.

b051ff478ba456916aefc283d685f07.png

New creation: feel free to check it out if you're interested.

https://makerworld.com.cn/models/1022011