Hold All Your Dremel Bits With THE BLOCK

this is a quick and easy instructable to do

but with great results

what,s needed

1) block of wood measuring 14 inches in length by 4x4 inches. or what ever size you like.

2) measuring tape.

3) drill with a number 3 drill bit

4) ruler

5) pencil.

and lets go.

to begin with measure.whatever wood you can get so long as its block shaped

i made mine 14 inches in length

and 4inch square .

but go with what suits you.

then with your ruler measure and mark 10 mm spaces

now with the small sized drill bit and drill

drill a hole on the marks you made earlier

at an angle of 35 to 40 degrees .

look at the pics on the last step as a guide.

its upto you whether or not you sand it down and varnish but i didnt bother.

now you can fill in all those holes made with your dremel or rotary tool bits

i will be marking each side with the named dremel bits

ie one side for burrs

1 for router bits etc.

always remember to wear safety glasses etc

and happy hobbying