Hogwarts House Cup-mashup

by Ngrom in Craft > Art

904 Views, 1 Favorites, 0 Comments

Hogwarts House Cup-mashup

Screenshot 2020-07-23 at 13.44.17.png

Find a Hogwarts crest on Tinkercad. Also, find a goblet.

Supplies

I could not find a goblet that fitted my needs, so I use a trophy that was made by "Lanie_Athena" on Tinkercad and took off the handles. The Hogwarts crest was made by "ingenio 7".

Crest

Screenshot 2020-07-23 at 13.45.39.png

Change the crest dimensions to 1 inch by 1 inch. Copy and paste the Hogwarts crest, until you have four crests.

Assemble

Screenshot 2020-07-23 at 13.45.39.png

Place the crests around the goblet, that is 2 inches high and 1 inch in diameter on the bottom.

Finished

Screenshot 2020-07-23 at 13.44.17.png

It is finished, but if you want to print it, on a 3d-printer, the house cup should be turned upside down.