Hobby Kit

This hobby kit includes a cutting board and a pocket for your tools. It's for a simple hobbyer, no dremel pocket or soldering tool pocket. Theres a knife in there in between the ruler and the leatherman.

Knife

Duct Tape

Cutting board (That's the white thing)

Cut a piece of duct tape that is about six inches longer on each side.

Cut another piece of duct tape overlapping an inch on each side of the cutting board.

Put the together as shown in the picture

You want to wrap it loose enough so your tools can fit, but tight enough so they dont fall out.

Put the tools you would put in there under the strip. Tighten if needed. Then apply the bottom, so they dont fall out on the underside. Then youre finished. What you get is a kit that has a cutting board, a leatherman, wire cutters/ metal cutters, a knife, and a ruler (at least those were the four that I chose + the cutting board). Look soon to see those tools in an altoids tin minus the cutting board. Im working on it. Hope this works, please rate.