Hill Climb Cardboard Racing | DIY
by Delta Hack in Living > Toys & Games
8418 Views, 15 Favorites, 0 Comments
Hill Climb Cardboard Racing | DIY
![maxresdefault (4).jpg](/proxy/?url=https://content.instructables.com/FQL/4YB1/JE4KKMZH/FQL4YB1JE4KKMZH.jpg&filename=maxresdefault (4).jpg)
Hello everyone!
Today we make for you very nice Hill Climb Racing Game from cardboard for kids. You can play all day and you can lose in this game. If you want to make hard mode, you can speed up velocity of electric motors.
For this you need:
- cardboard
- skewers
- sticks for ice cream
- two electric motors 12 volts
- wire
- 9 volt battery
- Electromotor 9 volts
- foil
- double scotch tape
- paints
- hot glue
- bearings
First of all look the video instruction ->
Platform
![1.png](/proxy/?url=https://content.instructables.com/FA9/T1US/JE4KKKU4/FA9T1USJE4KKKU4.png&filename=1.png)
![2.png](/proxy/?url=https://content.instructables.com/FA9/ZZNY/JE4KKKUI/FA9ZZNYJE4KKKUI.png&filename=2.png)
![3.png](/proxy/?url=https://content.instructables.com/FPS/COSA/JE4KKKUU/FPSCOSAJE4KKKUU.png&filename=3.png)
![4.png](/proxy/?url=https://content.instructables.com/FMN/FAWU/JE4KKKVA/FMNFAWUJE4KKKVA.png&filename=4.png)
![5.png](/proxy/?url=https://content.instructables.com/FHV/3PFI/JE4KKKVM/FHV3PFIJE4KKKVM.png&filename=5.png)
To create a spinning platform I used fidget spinner and cardboard
Map
![6.png](/proxy/?url=https://content.instructables.com/FL3/D495/JE4KKKVY/FL3D495JE4KKKVY.png&filename=6.png)
![7.png](/proxy/?url=https://content.instructables.com/FUV/4NO0/JE4KKKWA/FUV4NO0JE4KKKWA.png&filename=7.png)
![8.png](/proxy/?url=https://content.instructables.com/FG5/PXR4/JE4KKKWM/FG5PXR4JE4KKKWM.png&filename=8.png)
![9.png](/proxy/?url=https://content.instructables.com/F37/298F/JE4KKKWY/F37298FJE4KKKWY.png&filename=9.png)
![10.png](/proxy/?url=https://content.instructables.com/F8Q/MEU0/JE4KKKWZ/F8QMEU0JE4KKKWZ.png&filename=10.png)
![11.png](/proxy/?url=https://content.instructables.com/FGG/57X1/JE4KKKX1/FGG57X1JE4KKKX1.png&filename=11.png)
![12.png](/proxy/?url=https://content.instructables.com/F3P/1UDV/JE4KKKXD/F3P1UDVJE4KKKXD.png&filename=12.png)
![15.png](/proxy/?url=https://content.instructables.com/FD9/JO5X/JE4KKKYH/FD9JO5XJE4KKKYH.png&filename=15.png)
![13.png](/proxy/?url=https://content.instructables.com/FF1/WZ1F/JE4KKKXS/FF1WZ1FJE4KKKXS.png&filename=13.png)
![14.png](/proxy/?url=https://content.instructables.com/FAV/K8VG/JE4KKKYF/FAVK8VGJE4KKKYF.png&filename=14.png)
![16.png](/proxy/?url=https://content.instructables.com/FSA/1C25/JE4KKKYU/FSA1C25JE4KKKYU.png&filename=16.png)
I used cardboard to create the map.
The platform is being moved by 12-volt electric motors
Remote Control
![17.png](/proxy/?url=https://content.instructables.com/FD5/VRI2/JE4KKKZ9/FD5VRI2JE4KKKZ9.png&filename=17.png)
![18.png](/proxy/?url=https://content.instructables.com/FER/6JPA/JE4KKKZE/FER6JPAJE4KKKZE.png&filename=18.png)
![19.png](/proxy/?url=https://content.instructables.com/FLZ/H8XW/JE4KKKZH/FLZH8XWJE4KKKZH.png&filename=19.png)
![20.png](/proxy/?url=https://content.instructables.com/F2U/EGBJ/JE4KKKZT/F2UEGBJJE4KKKZT.png&filename=20.png)
![21.png](/proxy/?url=https://content.instructables.com/FEK/46TL/JE4KKKZU/FEK46TLJE4KKKZU.png&filename=21.png)
![22.png](/proxy/?url=https://content.instructables.com/FOG/07KA/JE4KKL07/FOG07KAJE4KKL07.png&filename=22.png)
![25.png](/proxy/?url=https://content.instructables.com/FL3/ZFE7/JE4KKL10/FL3ZFE7JE4KKL10.png&filename=25.png)
![23.png](/proxy/?url=https://content.instructables.com/FB2/Y5ZO/JE4KKL09/FB2Y5ZOJE4KKL09.png&filename=23.png)
![24.png](/proxy/?url=https://content.instructables.com/F0L/TGZR/JE4KKL0O/F0LTGZRJE4KKL0O.png&filename=24.png)
I used 5 bolts for the contacts.
This scheme is necessary in order for the fall to occur in both directions.
Car
![37.png](/proxy/?url=https://content.instructables.com/FJU/XIVF/JE4KKL84/FJUXIVFJE4KKL84.png&filename=37.png)
![39.png](/proxy/?url=https://content.instructables.com/FHM/OKHH/JE4KKKR9/FHMOKHHJE4KKKR9.png&filename=39.png)
![38.png](/proxy/?url=https://content.instructables.com/FTU/2UQU/JE4KKL8H/FTU2UQUJE4KKL8H.png&filename=38.png)
![40.png](/proxy/?url=https://content.instructables.com/FQN/JHXL/JE4KKKRA/FQNJHXLJE4KKKRA.png&filename=40.png)
![28.png](/proxy/?url=https://content.instructables.com/F91/S798/JE4KKL20/F91S798JE4KKL20.png&filename=28.png)
![29.png](/proxy/?url=https://content.instructables.com/FZ7/USFZ/JE4KKL3D/FZ7USFZJE4KKL3D.png&filename=29.png)
![30.png](/proxy/?url=https://content.instructables.com/F5U/RJIR/JE4KKL3P/F5URJIRJE4KKL3P.png&filename=30.png)
![32.png](/proxy/?url=https://content.instructables.com/FI2/5MX7/JE4KKL6K/FI25MX7JE4KKL6K.png&filename=32.png)
![33.png](/proxy/?url=https://content.instructables.com/FAQ/SZZN/JE4KKL6L/FAQSZZNJE4KKL6L.png&filename=33.png)
![31.png](/proxy/?url=https://content.instructables.com/FVE/G7U8/JE4KKL44/FVEG7U8JE4KKL44.png&filename=31.png)
![35.png](/proxy/?url=https://content.instructables.com/F2S/GF7L/JE4KKL7A/F2SGF7LJE4KKL7A.png&filename=35.png)
![36.png](/proxy/?url=https://content.instructables.com/FSC/XXD8/JE4KKL7Q/FSCXXD8JE4KKL7Q.png&filename=36.png)
![34.png](/proxy/?url=https://content.instructables.com/F3K/GX5Q/JE4KKL6Y/F3KGX5QJE4KKL6Y.png&filename=34.png)
I came up with a machine control system.
To do this, you need to make rails of sticks. Lock the sliding surface. and attach the machine to it.
Game Over
![41.png](/proxy/?url=https://content.instructables.com/F37/KO7R/JE4KKKRB/F37KO7RJE4KKKRB.png&filename=41.png)
![42.png](/proxy/?url=https://content.instructables.com/F4Y/M6NO/JE4KKKRD/F4YM6NOJE4KKKRD.png&filename=42.png)
![43.png](/proxy/?url=https://content.instructables.com/FLA/XDDI/JE4KKKRP/FLAXDDIJE4KKKRP.png&filename=43.png)
![44.png](/proxy/?url=https://content.instructables.com/FB4/I5RZ/JE4KKKS4/FB4I5RZJE4KKKS4.png&filename=44.png)
![45.png](/proxy/?url=https://content.instructables.com/FK8/H0KE/JE4KKKS5/FK8H0KEJE4KKKS5.png&filename=45.png)
![46.png](/proxy/?url=https://content.instructables.com/FJC/10SZ/JE4KKKSI/FJC10SZJE4KKKSI.png&filename=46.png)
![47.png](/proxy/?url=https://content.instructables.com/FG1/ORUK/JE4KKKSK/FG1ORUKJE4KKKSK.png&filename=47.png)
For the inscription to fall, you need to make a system.
To do this, you need a battery, a motor, a stick and a foil.
The foil closes the contact when the machine is turned over.
Decoration
![48.png](/proxy/?url=https://content.instructables.com/FVI/26NV/JE4KKKSL/FVI26NVJE4KKKSL.png&filename=48.png)
![49.png](/proxy/?url=https://content.instructables.com/FM3/04V8/JE4KKKSM/FM304V8JE4KKKSM.png&filename=49.png)
![50.png](/proxy/?url=https://content.instructables.com/F1N/BANX/JE4KKKSO/F1NBANXJE4KKKSO.png&filename=50.png)
![51.png](/proxy/?url=https://content.instructables.com/FIX/PYVZ/JE4KKKT0/FIXPYVZJE4KKKT0.png&filename=51.png)
![26.png](/proxy/?url=https://content.instructables.com/FU2/CRHY/JE4KKL1C/FU2CRHYJE4KKL1C.png&filename=26.png)
![27.png](/proxy/?url=https://content.instructables.com/FLY/PKL4/JE4KKL1O/FLYPKL4JE4KKL1O.png&filename=27.png)
I used the image of coins and capacity from the game. It looks very similar.
Rejoice
![52.png](/proxy/?url=https://content.instructables.com/FMP/FLPV/JE4KKKTD/FMPFLPVJE4KKKTD.png&filename=52.png)
![53.png](/proxy/?url=https://content.instructables.com/FFW/FD9L/JE4KKKTE/FFWFD9LJE4KKKTE.png&filename=53.png)
![54.png](/proxy/?url=https://content.instructables.com/F97/ZPZP/JE4KKKTS/F97ZPZPJE4KKKTS.png&filename=54.png)
This game is ideal for children. It develops creativity and intelligence.
Subscribe to our channel on Youtube. ) Thanks for watching and likes.