High Performance Enhanced Development Board Compatible With Arduino UNO

ü Full resource of UNO R3

ü Onboard Virtual USB HID device n The USB HID can be programming the board as a keyboard / mice / etc… with HID class device

ü Ground test terminal ü TQFP-48 MD-3248P MCU

ü Analog power and digital power and ground are separated

ü Onboard 4.096V/2.048V voltage reference source n 4.096V for PWM-DAC n AREF for MCU ADC selectable between 4.096V and 2.048V

ü 4 channel onboard PWM-DAC n CH0/1 with 16bit resolution n CH2/3 with 12bit resolution

ü 5 channel High Voltage Analog input n Range 32V with 4.096V AREF n Range 16V with 2.048V AREF

ü Onboard 3 tack switch buttons and 3 LEDs for fast programming

○
Massduino MD-3248P with 32KB Flash , 2KB SRAM

○ Fully Arduino IDE development

○ Full arduino UNO resource support

○ Rich additional resource

3 user programmable LEDs

3 tack switch buttons

4 CH pwm DAC (2 ch fast mode and 2 ch high resolution mode)

5 CH HV ADC (Max input 32V)

Onboard 4.096V and 2.048V voltage reference source

○ Virtual USB , make the board as a HID device (Keyboard / Mice etc.)

○ DC input voltage : DC 9 to 24V
○ System voltage : 3.3V or 5V ○ PWM DAC Range : 0 ~ 4.096V ○ PWM Resolution (CH 1/2): 16bit ○ PWM Resolution ( CH 3/4): 10bit ○ HV ADC input range: 0~32V ○ HV ADC resolution: 1mV w/s 15bit ADC (analogRead_15bits())

Install Massduino support package

Inorder to use Massduino UNO Pro , you need to download massduino support package from below link:

http://www.inhaos.com/downcount.php?download_id=21...

After you download and unzip the file , you will got two folder:

Find the directory that suits your Arduino IDE version , copy to target directory . Here is the default sketchbook directory for most popluar system:

> Windows: C:\Users\\Documents\Arduino

> Mac OSX: /Users/user/Documents/Arduino

> LINUX: /home//sketchbook

And then restart the Arduino IDE , you will see the device appear in the menu :

Purchase link：https://www.ebay.com/itm/UNO-Pro-Compatible-DAQ-16...