Hexa-hunt (fully 3d Printable Board Game)
by Matrix_8 in Living > Toys & Games
271 Views, 2 Favorites, 0 Comments
Hexa-hunt (fully 3d Printable Board Game)
![Neues Projekt.jpg](/proxy/?url=https://content.instructables.com/F6S/KFAD/LG6K7E6Q/F6SKFADLG6K7E6Q.jpg&filename=Neues Projekt.jpg)
![Game_render_final.png](/proxy/?url=https://content.instructables.com/FAL/5KA0/LG6K7CAY/FAL5KA0LG6K7CAY.png&filename=Game_render_final.png)
![Game_render4.png](/proxy/?url=https://content.instructables.com/FDN/2I5J/LG6K7CB0/FDN2I5JLG6K7CB0.png&filename=Game_render4.png)
![20230408_103213.jpg](/proxy/?url=https://content.instructables.com/F7C/IMTW/LG6K7CBE/F7CIMTWLG6K7CBE.jpg&filename=20230408_103213.jpg)
![20230408_103221.jpg](/proxy/?url=https://content.instructables.com/FZF/5ZHS/LG6K7CBG/FZF5ZHSLG6K7CBG.jpg&filename=20230408_103221.jpg)
![20230408_103424.jpg](/proxy/?url=https://content.instructables.com/FZ2/6VFE/LG6K7CBT/FZ26VFELG6K7CBT.jpg&filename=20230408_103424.jpg)
I always wanted to make a board game and I made my first in 6th grade (It was bad, really bad) out of wood. Since then (a few years later, I am currently attending 8th grade at Maria-Theresia-Gymnasium), I got my 3d printer and Fusion 360 “skills” and I made a new one. It is 100% 3d printable and only takes around 9 hours to print. The game is a lot of fun and I put a lot of effort into it since I made it from scratch.
Supplies
![Game_render1.png](/proxy/?url=https://content.instructables.com/FUY/PV1S/LG6K7CB3/FUYPV1SLG6K7CB3.png&filename=Game_render1.png)
![Game_render2.png](/proxy/?url=https://content.instructables.com/FGC/GL05/LG6K7CB2/FGCGL05LG6K7CB2.png&filename=Game_render2.png)
![Game_render3.png](/proxy/?url=https://content.instructables.com/F8P/5PPC/LG6K7CB1/F8P5PPCLG6K7CB1.png&filename=Game_render3.png)
![Game_render5.png](/proxy/?url=https://content.instructables.com/FPI/ZU3E/LG6K7CAZ/FPIZU3ELG6K7CAZ.png&filename=Game_render5.png)
You basically only need filament in different colours and a 3d printer, the couloirs you need will depend on which biomes you want to play, I used green and orange for the desert and forest biome.
-3d printer
-Black filament
-Yellow, gold filament
-Two of these colours: orange, yellow, brown, green, blue, purple
-Two more colours of your choice for the player figures
Design
Here is the design process in fusion 360 of the 4th iteration.
Slicing
![Slice4.png](/proxy/?url=https://content.instructables.com/F3N/JNB3/LG6K7EGZ/F3NJNB3LG6K7EGZ.png&filename=Slice4.png)
![Slice4.png](/proxy/?url=https://content.instructables.com/FRE/3IFB/LG6K7EK3/FRE3IFBLG6K7EK3.png&filename=Slice4.png)
![Slice3.png](/proxy/?url=https://content.instructables.com/FBS/9JYW/LG6K7EH0/FBS9JYWLG6K7EH0.png&filename=Slice3.png)
![Slice3.png](/proxy/?url=https://content.instructables.com/F39/ACC6/LG6K7ELY/F39ACC6LG6K7ELY.png&filename=Slice3.png)
![Slice.png](/proxy/?url=https://content.instructables.com/F6T/RMFO/LG6K7EH1/F6TRMFOLG6K7EH1.png&filename=Slice.png)
![Slice.png](/proxy/?url=https://content.instructables.com/FV9/PX2I/LG6K7EIA/FV9PX2ILG6K7EIA.png&filename=Slice.png)
![Slice1.png](/proxy/?url=https://content.instructables.com/FC9/CPPO/LG6K7EH2/FC9CPPOLG6K7EH2.png&filename=Slice1.png)
![20230408_103241.jpg](/proxy/?url=https://content.instructables.com/FW0/G284/LG6K7CBQ/FW0G284LG6K7CBQ.jpg&filename=20230408_103241.jpg)
![20230408_103234.jpg](/proxy/?url=https://content.instructables.com/FXM/9OHG/LG6K7CBO/FXM9OHGLG6K7CBO.jpg&filename=20230408_103234.jpg)
![20230408_103553.jpg](/proxy/?url=https://content.instructables.com/FVP/SSJU/LG6K7CC3/FVPSSJULG6K7CC3.jpg&filename=20230408_103553.jpg)
I would recommend you to print the models with 0.28 layer height to achieve the 9-hour print time, you could also use 0.2 layer height for better tolerances. I designed the tolerances on this model, so it could print on printers with bad accuracy or even elephant's foot. You need to print:
1x - Game_Board in white
9x - Treasure, bandit in black
9x - Trasure, bandit in yellow, gold
9x - player, Top peaca, cover in blue or green
9x - player, top peaca, cover in brown or orange
1x- player, Top peaca, cover in any color you like
1x- player, Top peaca, cover in any color you like
Time to Play
![b70641d5d84e4f87abd90b04b545ea39OASjNYLl1eTpzYus-0.jpg](/proxy/?url=https://content.instructables.com/FRQ/9Q3K/LG6K7GJB/FRQ9Q3KLG6K7GJB.jpg&filename=b70641d5d84e4f87abd90b04b545ea39OASjNYLl1eTpzYus-0.jpg)
![b70641d5d84e4f87abd90b04b545ea39OASjNYLl1eTpzYus-1.jpg](/proxy/?url=https://content.instructables.com/FQ0/O4M5/LG6K7GJC/FQ0O4M5LG6K7GJC.jpg&filename=b70641d5d84e4f87abd90b04b545ea39OASjNYLl1eTpzYus-1.jpg)
Here's the game-guide. Have fun!