Heartbeat Game--Project

by chanhui2000 in Circuits > Arduino

218 Views, 1 Favorites, 0 Comments

Heartbeat Game--Project

IMG_20200518_051245.jpg

Today is May 20th, as we all know. It's already become traditional Chinese Valentine's Day.(520 in Chinese means I love you).

Now, we're going to make an interactive device called heartbeat lab to test the couple's tacit understanding.

This is a test of the tacit understanding between couples device, couples to press both sides of the heart button, always hold, the light will start from their respective heart-shaped button to the middle of the heart position, until a whole light all lit, the whole process is 2 seconds;

Installing Light Strips

IMG_20200511_100514_1.jpg
IMG_20200511_105616_1.jpg

According to the design drawing, please cut strip lights into a number of small segments , and then fixed to the back plate

After fixing, each segment will be welded together, during welding please pay attention to the direction of the light strip

Writing Code

批注 2020-05-19 000740.png
IMG_20200511_153021(1).jpg

After the light strip is welded, we must first determine the number of lamp beads, If the quantity is deviated, the light strip will not show the desired effect.After the number of beads, start to write the code.

Site Installation

IMG_20200518_020417.jpg
IMG_20200518_032447.jpg

Because the size of the device is too large, not convenient to transport, in the design of the time divided into three segments, transport to the site after the stitching.

After the welding, if there is no problem in the measurement, first carry out the power test to check whether there is any problem in the circuit.Start pasting the stickers after the test is correct.

The button can be installed after the sticker is put on

Power on test after all installation.