Solitaire Heart Pendant

by Mrballeng in Craft > Jewelry

4762 Views, 41 Favorites, 0 Comments

Solitaire Heart Pendant

IMG_0780.JPG
IMG_0789.JPG
IMG_0788.JPG
IMG_0790.JPG
IMG_0784.JPG
IMG_0781.JPG
IMG_0778.JPG
IMG_0787.JPG
IMG_0786.JPG
IMG_0783.JPG
IMG_0782.JPG
Valentines day is just around the corner but you don’t have to break the bank to make your sweetheart smile. This pendant Is made from two nickels and a cubic zirconium stone.

To make it I hammered out a nickel and shaped into a heart. Then I drilled a small hole in the center and used a cone shaped diamond bur to bevel the hole for the stone (a set of 16 different burs cost me $7 at Harbor Freight Tools). The stone I got from target. Once I liked the fit I soldered a small piece of wire to the back of the pendant to hold the stone in place. I made another loop, again from nickel, and soldered it to the back of the heart.  All kinds of variations of this can easily be done. You can find more indepth instructions for a project like this under Teardrop Pendant and Solitaire Hex Bolt. Good luck.