Headphones Case

Headphone's Case: So that your headphones would not get tangled with other objects or misplaced.

• Empty Altoids Mint Box
• Construction Paper
• White Computer Printing Paper
• Scissors
• Markers
• Tape
• Headphones

• Use the White Computer Printing Paper to wrap it around the Altoids's Mint box in order to know how much of the paper you will be using for the box.
• Be sure to be precis when folding the paper around the bottom of the box.
• Remove the paper and now measure around the edges of the box like a burrito.
• Remove the paper again to view how much will be needed.

• Fold the ends into half a hexagon.
• Place the Altoids Mint Box on top of the paper and have it open.
• Fold the white paper into the opening of the box then close the lid. (Make sure its secured to the box)

• Get the scissors out and ready to cut the unnecessary extra paper.
• Make sure to keep enough paper of the edges so that there will be some to fold into the sides of the box.
• Begin to cut one of the edges off, then work on getting the next edge off.
• Make sure you fold the edges of the paper into the box.
• Proceed to cut the top of the box but leave some paper to fold into the box.

• Once you have finished cutting all the unnecessary extra paper, begin the taping process.
• Tape the outsides of the box first. Make sure to tape the paper securely!
• Once the outside is finished look around the box to make sure its in place.
• Open the lid of the empty box and check if the paper is secure.

• Repeat the same step 3.

• Time to decorate the finished product with markers or colored pencils.

• Place your pair of earphones inside to make sure it fits.
• Then your finished, No more tangling your earphones with other objects or misplacing it.