Have You Tried Turning It Off and on Again?
by shady_deluxe in Circuits > Remote Control
1588 Views, 14 Favorites, 0 Comments
Have You Tried Turning It Off and on Again?
This is a project that I made a few years ago. Now it 's time to publish it.
Have fun.
Have fun.
Things You Need
AVR-NET-IO
Basically it is an preprogrammed ATMEL ATMega with an ethernet interface. Where you connect via tcp socket and send control commands to set IO ports.
This board is developed in Germany. So unfortunately the support and community is in german.
For those who want to dig in:
Here you can buy it
http://www.pollin.de/shop/dt/MTQ5OTgxOTk-/Bausaetz...
http://www.amazon.de/Pollin-Bausatz-AVR-NET-IO/dp/...
Here are some documentation links
http://www.mikrocontroller.net/articles/AVR_Net-IO...
http://son.ffdf-clan.de
Basically it is an preprogrammed ATMEL ATMega with an ethernet interface. Where you connect via tcp socket and send control commands to set IO ports.
This board is developed in Germany. So unfortunately the support and community is in german.
For those who want to dig in:
Here you can buy it
http://www.pollin.de/shop/dt/MTQ5OTgxOTk-/Bausaetz...
http://www.amazon.de/Pollin-Bausatz-AVR-NET-IO/dp/...
Here are some documentation links
http://www.mikrocontroller.net/articles/AVR_Net-IO...
http://son.ffdf-clan.de
Remote Controlled Switch Socket
Common remote controlled switch which you can by everywhere.
Connect the AVR-NET-IO to the Remote Control
Install the Baby in Your Network
Try It! [not Yet]
The plan is to stream a live video and make it possible to control my lamp from all over the world.