Hard Drive Necklace

This is my hard drive necklace. I hope you like my design!

Pretty simple hope you make one too. Make sure and post me a picture when you are done

All you gotta do is get a star bit or phillips head to open a hard drive, the get you parts out and begin !

Take you spindle from the hard drive and get you screw driver and tap it on the back till the top pops off.

Vola!

Take your parts that you scavenged and piece together your design. I used a little wire to put it together through the holes already there.

Do the same with the wire and add the heads to the piece you have. You should end up with this

Take the wire, string or cord and add it to finish your necklace.

The holes are already there!

I hope you enjoy and please vote for me! thx for looking!