Hanging Shelf for Mini Green House or Multi Use

two pieces of 3/4 ply wood, a drill, router table, 1/4 round router bit, clamps, drill set, glue, two inch screws, a counter set drill, measuring tape, a pencil all found a techshop.

LIne up plywood to the edge and mark it for referance

Put routing bit in to table router adjust to desired height. Then route desired edges of ply wood.

Clap two pieces of plywood and drill four holes on the edge where screws will be going in after

apply glue to edge that is going to get screwed together

counter sink the holes that were drilled

screw two pieces of plywood together

Drill two holes for hanging support 

all done. hang where ever you want. and have fun with it.