Handy Solder,electrical Tape Holder
by jveazey in Workshop > Workbenches
719 Views, 7 Favorites, 0 Comments
Handy Solder,electrical Tape Holder

Cool little solder station,electrical tape caddy using scrap material around the shed.
Supplies



I used scrap material I have in my shed. Plywood ,used sponge brush handle,and a 2 X 2.
Drilling Holes

I cut the 2 X 2 to about 3 inches, and the plywood to about 6" X 5" it doesn't have to be exact.Then I used a 1/2 in hole drilling bit, (you can use a large regular bit) drilling into the 2x2.
Putting All Pieces Together.

I simply used a lil wood glue and screws to mount the base (plywood) and then inserted the dowel with a drop of wood glue.