Halloween Bat Decoration
![IMG-8156.jpg](/proxy/?url=https://content.instructables.com/FI0/0SXS/KOVH715V/FI00SXSKOVH715V.jpg&filename=IMG-8156.jpg)
This project is a decoration that uses on Halloween. It is a bat that can swing its wings and have two red LED lights on the eyes of the bat. When you need a decoration on Halloween immediately, people can make it very quickly and there is no lack of atmosphere. People can put it in front of the door, so people who want to go into your house can get the atmosphere of Halloween.
Materials:
1. Arduino Leonardo
2. Breadboard
3. Wires
4. Red LED
5. Resistor
6. Crocodile clip
7. Motor
8. Paper (it will be better if you use thicker paper)
9. String (it will be better if you use rough string) 10. Scissor
11. Box
Set Up
![IMG-7912.jpg](/proxy/?url=https://content.instructables.com/F5O/XEXM/KNN6K9XM/F5OXEXMKNN6K9XM.jpg&filename=IMG-7912.jpg)
![螢幕擷取畫面 2021-05-20 203309.jpg](/proxy/?url=https://content.instructables.com/FUG/DEJI/KOVH74O0/FUGDEJIKOVH74O0.jpg&filename=螢幕擷取畫面 2021-05-20 203309.jpg)
Downloads
Coding
![螢幕擷取畫面 2021-04-19 104842.jpg](/proxy/?url=https://content.instructables.com/FVV/D5JY/KNN6KATJ/FVVD5JYKNN6KATJ.jpg&filename=螢幕擷取畫面 2021-04-19 104842.jpg)
Cut the Bat
![IMG-7914.jpg](/proxy/?url=https://content.instructables.com/FAG/I8O3/KNN6K9WB/FAGI8O3KNN6K9WB.jpg&filename=IMG-7914.jpg)
Make sure the light ball can go through the hole on the eyes.
Make sure the string can go through the small hole on the wings.
Tie the String
![IMG-7910.jpg](/proxy/?url=https://content.instructables.com/FX3/SD0R/KNN6K9YT/FX3SD0RKNN6K9YT.jpg&filename=IMG-7910.jpg)
![IMG-7911.jpg](/proxy/?url=https://content.instructables.com/FF2/3WXC/KNN6K9YS/FF23WXCKNN6K9YS.jpg&filename=IMG-7911.jpg)
Put in the Box
![IMG-7916.jpg](/proxy/?url=https://content.instructables.com/F8T/0YCG/KNN6KBTT/F8T0YCGKNN6KBTT.jpg&filename=IMG-7916.jpg)
Done
![2021 Arduino 期末作品](/proxy/?url=https://content.instructables.com/FOH/JQJK/KOVH731T/FOHJQJKKOVH731T.jpg&filename=2021 Arduino 期末作品)