Half Life Original MP5

I made a half life 1 MP5 for my Gordon freeman half life cosplay, it turned out quite well, its reliable but I wouldn’t trust it with my life for durability.

• adventure force guardian toy gun found usually at Walmart

• glue gun + sticks

• toilet paper cardboard tubes x3

• scissors / clippers

• time

• imagination

Cut and sand off the fore grip, I don’t know if you can notice it but there are arrows to where the fore grip used to be.

Take off the stock of the toy gun and glue to the stock adapter, then place on the cut paper tube sorry I couldn’t show it it was short time, I would just presume it’s 3-2 inches wide.

Glue on the cardboard tube to the magazine adapter edge, be sure to hold it down by its side to dry.

Glue on the last cardboard tube beneath the barrel thingamabob (bottom rail).

Cut off the remaining cardboard of the stock/butt of the gun.

You can make an FPS shooter video or HλLF-LIFE original video with this now, I will make more half life weapons soon, but not like the hd model ones unless they are nearly identical to the original, also a instuctable on how to make a fps, enjoy!