Half Life MetroCop Costume Part 1 (Weapons)
by CreatinTime in Craft > Costumes & Cosplay
1225 Views, 2 Favorites, 0 Comments
Half Life MetroCop Costume Part 1 (Weapons)
![IMG_6183.JPG](/proxy/?url=https://content.instructables.com/FYS/NMGS/K931NBV7/FYSNMGSK931NBV7.jpg&filename=IMG_6183.JPG)
This is the first part of the series where I will show you guys how to make a half-life MetroCop costume cosplay.
Supplies
-PVC Pipe .8 inches wide
-plastic glue
-black/orange paint
-3D printed parts: Click Here
-3D printer (To print parts)
Bottom Part
![IMG_6172.JPG](/proxy/?url=https://content.instructables.com/FN9/HFV0/K931MQ33/FN9HFV0K931MQ33.jpg&filename=IMG_6172.JPG)
![IMG_6173.JPG](/proxy/?url=https://content.instructables.com/F5X/D598/K931MQ3U/F5XD598K931MQ3U.jpg&filename=IMG_6173.JPG)
![IMG_6175.JPG](/proxy/?url=https://content.instructables.com/F6R/4OUL/K931MQ5H/F6R4OULK931MQ5H.jpg&filename=IMG_6175.JPG)
Cut a piece of the PVC pipe that is about 12 inches long. Now Apply glue to the bottom of the PVC pipe and attach the bottom piece.
Middle Part
![IMG_6176.JPG](/proxy/?url=https://content.instructables.com/FU5/4CXA/K931MQ6A/FU54CXAK931MQ6A.jpg&filename=IMG_6176.JPG)
![IMG_6178.JPG](/proxy/?url=https://content.instructables.com/FB3/3ZZD/K931MQ6H/FB33ZZDK931MQ6H.jpg&filename=IMG_6178.JPG)
Now mark out a line about 4 inches from the bottom for the handle part to fit then apply glue and slide the piece onto the pipe so it is on the line.
Top Part
![IMG_6179.JPG](/proxy/?url=https://content.instructables.com/FM7/LXUZ/K931MQ6J/FM7LXUZK931MQ6J.jpg&filename=IMG_6179.JPG)
![IMG_6181.JPG](/proxy/?url=https://content.instructables.com/FL5/PBJB/K931MQ6N/FL5PBJBK931MQ6N.jpg&filename=IMG_6181.JPG)
Now apply glue to the top of the pipe and stick the final piece down.
Dry
![IMG_6162.JPG](/proxy/?url=https://content.instructables.com/F80/FWWC/K931L6GN/F80FWWCK931L6GN.jpg&filename=IMG_6162.JPG)
Wait 24 hours for the glue to dry for best results.
Paint
![IMG_6165.JPG](/proxy/?url=https://content.instructables.com/FPK/QWOT/K931MQ78/FPKQWOTK931MQ78.jpg&filename=IMG_6165.JPG)
Now spray-paint the whole thing black and wait for it to dry.
More Paint...
![IMG_6183.JPG](/proxy/?url=https://content.instructables.com/FYS/NMGS/K931NBV7/FYSNMGSK931NBV7.jpg&filename=IMG_6183.JPG)
Now that the paint is dry, paint the little bumpy rods on top an red-orange color (I used a glow in the dark paint but this is optional) paint and wait to dry.
- FINISHED
Complete series: