Half Carrick Bend
![P1010006 (5).JPG](/proxy/?url=https://content.instructables.com/FVD/SPWZ/K9ACGOE0/FVDSPWZK9ACGOE0.jpg&filename=P1010006 (5).JPG)
![P1010007 (5).JPG](/proxy/?url=https://content.instructables.com/FTQ/4PWN/K9ACGOE3/FTQ4PWNK9ACGOE3.jpg&filename=P1010007 (5).JPG)
Makes an nice loop. Suitable for lanyard or zipper pull
![P1010001 (8).JPG](/proxy/?url=https://content.instructables.com/FSI/76OE/K9ACGOBM/FSI76OEK9ACGOBM.jpg&filename=P1010001 (8).JPG)
Take short length of cord and fold left hand end under itself for a couple of inches, forming a bight.
![P1010002 (8).JPG](/proxy/?url=https://content.instructables.com/F2H/AIXB/K9ACGOC7/F2HAIXBK9ACGOC7.jpg&filename=P1010002 (8).JPG)
Take the other end and bring it over the two strands of the bight forming the loop of your project.
![P1010003 (6).JPG](/proxy/?url=https://content.instructables.com/FWT/ZLS7/K9ACGOCW/FWTZLS7K9ACGOCW.jpg&filename=P1010003 (6).JPG)
Bring the same end under over.
![P1010004 (6).JPG](/proxy/?url=https://content.instructables.com/F6N/K139/K9ACGODH/F6NK139K9ACGODH.jpg&filename=P1010004 (6).JPG)
Next bring the same end to the left under, over, under.
![P1010001 (9).JPG](/proxy/?url=https://content.instructables.com/FDB/NQYW/K9ACGP2X/FDBNQYWK9ACGP2X.jpg&filename=P1010001 (9).JPG)
Next bring the end from step one over to the left above the other end.
![P1010002 (9).JPG](/proxy/?url=https://content.instructables.com/FMF/1ITZ/K9ACGP3O/FMF1ITZK9ACGP3O.jpg&filename=P1010002 (9).JPG)
![P1010003 (7).JPG](/proxy/?url=https://content.instructables.com/FOJ/0DCY/K9ACGP3R/FOJ0DCYK9ACGP3R.jpg&filename=P1010003 (7).JPG)
Tighten.