Hairbrush That Hold Your Hair Ties, Bobby Pins, Etc. (Has a Mirror.)

I wanted to make a hairbrush that holds your beauty needs. My mom always complains about losing her hair ties and bobby pins. I wanted to make a hairbrush to have all of her hair stuff in one place so she doesn't lose her stuff. The brush holds hair ties, bobby pins and it has a mirror so she can see what she looks like after she brushes her hair.

The supplies you will need is https://www.printables.com/model/685043-fancy-paddle-brush https://www.tinkercad.com/dashboard https://www.prusa3d.com/en/page/prusaslicer_424/ and a 3D printer, bristles from an old brush and a mirror that fits into the container of the brush.

The first step i did to create the brush was i went to https://www.printables.com/ to find a hairbrush back that liked to be the backbone of the brush.

Next, i uploaded your design from printables into Tinker Cad and adjust the size to my liking

Then i went to printables again and found a hinged box i liked that would go on the outside of my brush to be the box with the mirror and storage.

After i found the box that fit the needs of my brush i uploaded the box from printables to tinker cad and adjusted the sizing to my liking.

I finished my prototype and adjusted all of the sizing of the brush and the box to fit my needs in Tinker Cad.

I then exported my design from Tinker Cad into Prusa Slicer and sliced my design so it was ready to print.

I then put my design in the 3D printer.

I put the box together.

I next glued the box onto the brush.

After i finished putting the box onto the brush i put the mirror inside of the box.

I then finished up the brush by gluing on the bristles onto the brush.

After i finished the brush itself I put my hair ties, bobby pins, etc into the brush.

The brush is now completed.