HOW TO MAKE a USB LED!

Ever wanted to make an inexpensive light or a cheap nightlight for the kids here's how-

All You Need Is-

Hot Glue And Gun
Wire
Old USB Head
Solder and soldering iron
Led
100k Ohm Resistor!

First snip the resistor so 5mm is left on each end.
Then do the same with the led but just leave a little more on one side indicating the positive.

Now start soldering the resistor and the wire on the 2 ends of the USB and the led on the end of that!

Now you just give it a glue and touch up,
Then plug it in and... LET THERE BE LIGHT!

Thanks For The Attention!
Like, Comment and Follow Me

Want More?

Go to jackshow2s.weebly.com