HOW TO MAKE a GLOWING GLASS!

by Jacks how2s in Circuits > Assistive Tech

718 Views, 3 Favorites, 0 Comments

HOW TO MAKE a GLOWING GLASS!

IMG_3969.JPG
IMG_3945.JPG

To make this cool projects you will need~

An RGB LED with wires already soldered

3 plastic cups

Rotary Tool with 4mm drill bit or poke a hole with soldering iron

Super glue

Drilling a Hole for the LED

IMG_3946.JPG
IMG_3947.JPG
IMG_3948.JPG
IMG_3949.JPG
IMG_3952.JPG
IMG_3954.JPG
IMG_3955.JPG

First get the tool and drill a hole for the led,

Next get the led and place it in the hole (it should fit very snug but put a few drops of super glue.)

Adding Another Cup

IMG_3953.JPG
IMG_3956.JPG
IMG_3957.JPG
IMG_3958.JPG
IMG_3959.JPG
IMG_3960.JPG

Now get a new cup and placing upside down on the table,

Then get your led cup an place it on top,

after that apply a few drops of super glue around the top of the cup to help it stay in place!

Giving It Power

IMG_3962.JPG
IMG_3961.JPG
IMG_3963.JPG
IMG_3964.JPG

Start by getting a button cell 3 volt battery and taping both of the led wires to it ,

Next place it in a new cup and place your other 2 joint cups on top (try to cover most of the wires)

Test

IMG_3965.JPG
IMG_3966.JPG
IMG_3967.JPG

Lastly add some water and kill the lights...

WOW!!! Your finished!

Well Done!

For more go to My Website

And Subscribe