HOW TO MAKE FIDGET SPINNER UNDER 1$ WITH NO BALL BEARINGS

Hi

• Fidget Spinner Is a Stress Relieving Toy
• Nowadays all are Going Crazy Over Fidget Spinners Including me!
• So tried to Build One Which ill Show you in this Instructable
• This One Which was made by me has a very good spin time Inspite of Not having Any Bearings
• Build Time Is Less Than 30minutes
• Important Thing Is Building This Wouldn't Cost Even 1$,So lets Begin

Bonus Tip : For Best and Free Project ideas check www.letsmakeprojects.com

• The 2 Videos are Different and Have Different Spin Time
• Second Video Shows Making Of Fidget Spinner
• Comment Which Spinner You Liked among Two and Why..

• The Entire Body Is Made From A piece Of Cardboard
• The rectangular Cardboard piece are cut Which are Approx 9cm x 2cm

• To The Top Ends Of Cardboard Weights are Attached i Used 2 Pennys
• For Finishing I've used Blue Colour Sheet Which Looks Good While Spinning
• The Colour Papers are Glued To The Cardboard

• 2 Discs are cut Which Are 1cm in diameter
• Using Toothpic the Cardboard Body Is Pierced at its Centre
• At One End Of Toothpic Disc is Coupled Using Glue
• At The Other End i.e At The Sharp Edge Other Disc Is Attached
• Make Sure To Leave Little Free Space Between Discs For Free Rotation
• Excess Toothpic Material Is Removed Using Scissor
• Fidget Spinner Is Ready!
• ThankYou