HOW TO MAKE a LETTER W OUT OF PVC PIPE

Are you bored? Do you have extra PVC pipe laying around? 

Here is a simple project to make a letter W out of PVC and connectors!

ALL PVC PIPES AND CONNECTORS USED ARE A HALF INCH. 

You will need...
15 in of PVC 
3 90 degree elbow connectors
Marker
Ruler
Pipe Cutter

Use the ruler and measure out each piece of PVC. Use the marker and mark the length of the piece needed. Then use the pipe cutter to cut each piece.

You should cut two pieces of 4 in PVC, and two pieces of 3 in PVC. 

Take one 4 in PVC and one 90 degree elbow connector and connect them together. 

Repeat the step from the left side and do it for the right side. (Take one 4 in PVC and one 90 degree elbow connector and connect them together.)

Take the last 90 degree elbow connector and attach both 3 in pieces of PVC into both sides of the open connector.

You should now have 3 pieces. The left side, The right side and the middle. Lay them out together in the shape of a W. 

Now take the left side and attach the connector to the 3 in pipe. Do the same with the right side. 

There you have it, a letter W made completely out of PVC pipe and connectors! 

ENJOY!