HOW TO CREATE a 3D RECORD PLAYER IN 3D MODELLING SOFTWARE

3D designing is becoming famous among numerous enterprises and experts. With 3D designing, one can create 3D models that can be used to imagine legitimate articles. In this article, we are 3D designing a record player in SelfCAD. If you have not endeavoured it yet, SelfCAD is one of the most direct yet proficient 3D designing programs for clients, everything being equal. Beginning with orchestrating the 3D cube, we will change it with tools like Scale, fillet, 3D shapes, and so on. SelfCAD is one of the most surprising 3D modelling software, including various highlights to organise the 3D tools.

You can also check our webpage and go through our other such articles for example how to design a 3D phone.

Along these lines, how about we get everything rolling.

Insert a Cube and Fillet It

First of all, from the 3D shapes category we will insert a cube to the working interface. Set the width to 162, height to 40 and depth to 162. Then go to the modify category and select the fillet tool. Set the intensity to 10 and level to 2.

Add Smoothness to the Cube and Insert a Cylinder

Next, from the modify category, select the round object tool. Set the smoothness to 2. Then insert a cylinder to the working interface by setting the top radius to 65, bottom radius to 65, height to 2 and position y to 39.

Insert Cylinders of Different Sizes

Now, we will insert another cylinder and set its top radius to 2, bottom radius to 2, height to 7 and position y to 37. Then insert another cylinder and set its top radius to 2, bottom radius to 2, height to 7 and position y to 37.

Insert a Cylinder and Create Its Copies

Next, insert one more cylinder and set its top radius to 5, bottom radius to 5, height to 10, position x to -55, position y to 15, position z to 81, rotation y to 90 and rotation z to 90. Then click on the copy button and copy the selected objects.

Move the Created Copies

Now, select the move tool and set x to -36. Then copy the selected object. Set x to -55. After that, copy again the selected object.

Rotate the Object and Place It in the Position

Next, we will select the rotate tool and set x to 90. Then move the object along the y axis, to a value of 34. After that, set z to -63.

Scale the Selected Object and Insert a Cube

Now, select the scale tool and set x to 12.31, y to 12.31 and z to 12.31. Then insert a cube and set its width to 2, height to 50, depth to 3, position x to 55, position y to 42, position z to -47, rotation y to 90 and rotation z to 90.

Extrude the Smallest Face of the Cube

Next, we will opt for the face selection and select the open end smallest face of the cube. Then, go to the modify category and select the extrusion tool. Set the amount to 25.

Move the Face of the Object and Insert a Cube

Now, using the move tool move the head of the object along the x-axis to an amount of 43. Then insert a cube and set its width to 6, height to 5, depth to 11, position x to 54, position y to 40, and position z to -75.

Insert a Cube and Make Them a Union

Next, we will insert another cube and set its width to 6, height to 4, depth to 15, position x to 49, position y to 41, and position z to -10 and rotation y to -24. Then select all the objects, go to stitch and scoop and make them a union.

CONCLUSION: THEREFORE, WE HAVE CREATED a 3D RECORD PLAYER USING SelfCAD

3D modelling characters isn't confusing. You basically have to have the fitting tools with you. We've figured out shrewd ways of making a straightforward record player utilising the smoothness tool and different tools of SelfCAD. You can sort this out effectively also. Besides, you can play with the accessible tools and even utilise something similar to methodology to make your own designs.