Growing Microgreens at Home DIY
Welcome to microgreens growing project!
Microgreens are young sprouts of vegetables and herbs that are high in vitamins and minerals.
They are easy to grow at home and can be a great addition to your diet. In this guide, we will show you how to create a simple and effective device for growing microgreens with your own hands.
Supplies
Programm
https://github.com/DiyYari/MicroGreen_automatic/tree/main
arduino nano
https://s.click.aliexpress.com/e/_DeiC5g7
rezystor 220om
https://s.click.aliexpress.com/e/_DdTHTV5
transistor 2n2222
https://s.click.aliexpress.com/e/_DloXZvV
fun 20x40 5v
https://s.click.aliexpress.com/e/_DEEvDjt
led
https://s.click.aliexpress.com/e/_DF8zWi7
fito led
https://s.click.aliexpress.com/e/_DCs35uF
usb
You need to solder the parts with wires according to the diagram. For this you will need any soldering iron and a little patience.
At the end, be sure to apply insulation to the contact areas to avoid short circuits.
download the program that needs to be written to the microcontroller from the github repository.
https://github.com/DiyYari/MicroGreen_automatic/tree/main
After that, connect the microcontroller to the computer and write it to the microcontroller in the arduino ide program. detailed instructions are in the video on my channel.
download the model of the device and print it on a 3D printer.
https://www.thingiverse.com/thing:6665280
you don't have to buy it, you can find someone who provides this service. it's not expensive.
after you have all the parts, assemble the electronics into the case.
Now that you have everything assembled, you can proceed to the most pleasant part.
Pour water into the reservoir up to the grid. This is approximately 350-400 milliliters.
Then pour in the seeds and close the lid on top.
After 3 days, the seeds will sprout and you can connect the lamp to a USB outlet.
in 4-5 days you will have such a harvest.
in total, to grow such a harvest, 7-8 days will be wasted. 3 days in a closed position and 4-5 with light.
you can see more detailed instructions on my channel.
https://www.youtube.com/@DIY_Yarik