Grolsch Keychain in Under 5 Minutes
by Amaf in Living > Life Hacks
1232 Views, 6 Favorites, 0 Comments
Grolsch Keychain in Under 5 Minutes
![IMG_20170817_144525.jpg](/proxy/?url=https://content.instructables.com/FN0/OGTH/J6FYTRWM/FN0OGTHJ6FYTRWM.jpg&filename=IMG_20170817_144525.jpg)
In this instructable I will show you how to make a key trinket from a Grolsch bottle cap.
Gather the Materials
![IMG_20170817_142917.jpg](/proxy/?url=https://content.instructables.com/FOW/TTK4/J6FYTS3X/FOWTTK4J6FYTS3X.jpg&filename=IMG_20170817_142917.jpg)
![IMG_20170817_143026.jpg](/proxy/?url=https://content.instructables.com/F0N/W0KE/J6FYTS3V/F0NW0KEJ6FYTS3V.jpg&filename=IMG_20170817_143026.jpg)
![IMG_20170817_143003.jpg](/proxy/?url=https://content.instructables.com/F69/BAXK/J6FYTS0B/F69BAXKJ6FYTS0B.jpg&filename=IMG_20170817_143003.jpg)
You will need:
- bottle cap
- key ring with chain
- copper wire or other material
- 1mm and 3mm drills
- pliers for cutting the wire.
Drilling the Bottle Cap
![IMG_20170817_142757.jpg](/proxy/?url=https://content.instructables.com/FZ8/OOG7/J6FYTRZY/FZ8OOG7J6FYTRZY.jpg&filename=IMG_20170817_142757.jpg)
![IMG_20170817_142820.jpg](/proxy/?url=https://content.instructables.com/FK0/CW6D/J6FYTRTC/FK0CW6DJ6FYTRTC.jpg&filename=IMG_20170817_142820.jpg)
![IMG_20170817_143222.jpg](/proxy/?url=https://content.instructables.com/FML/PW68/J6FYTS0R/FMLPW68J6FYTS0R.jpg&filename=IMG_20170817_143222.jpg)
![IMG_20170817_142848.jpg](/proxy/?url=https://content.instructables.com/FUK/VM44/J6FYTS4B/FUKVM44J6FYTS4B.jpg&filename=IMG_20170817_142848.jpg)
![IMG_20170817_143127.jpg](/proxy/?url=https://content.instructables.com/F51/SXLY/J6FYTS0J/F51SXLYJ6FYTS0J.jpg&filename=IMG_20170817_143127.jpg)
For this step you have to remove the red gasket from the cap.
Drill a hole in the bottom like in image. Make sure the chain can fit in the hole.
Now drill 2 side holes for the wire. It is better if the wire enters hard through the hole.
Cutting the Wire
![IMG_20170817_143037.jpg](/proxy/?url=https://content.instructables.com/FAC/AKWY/J6FYTS10/FACAKWYJ6FYTS10.jpg&filename=IMG_20170817_143037.jpg)
Measure the length of wire needed and cut it.
Attaching the Chain
![IMG_20170817_143144.jpg](/proxy/?url=https://content.instructables.com/FET/O38Y/J6FYTS0W/FETO38YJ6FYTS0W.jpg&filename=IMG_20170817_143144.jpg)
![IMG_20170817_143241.jpg](/proxy/?url=https://content.instructables.com/F9G/I926/J6FYTS0Q/F9GI926J6FYTS0Q.jpg&filename=IMG_20170817_143241.jpg)
With the last link of the chain in the hole push the wire all the way through the cap so it locks the chain in place.
Finishing Touch
![IMG_20170817_143455.jpg](/proxy/?url=https://content.instructables.com/F2N/UCXN/J6FYTS0M/F2NUCXNJ6FYTS0M.jpg&filename=IMG_20170817_143455.jpg)
Put the gasket back on and you're done. Your cute keychain is finished.