Greendale Community Collage Flag
by Krawnklier in Design > 3D Design
30 Views, 0 Favorites, 0 Comments
Greendale Community Collage Flag


Hey this is the Krinklier, thanks for viewing my first model. I made this flag for the fandom contest because I thought it might be an ok model. Enjoy.
Supplies
This is a STL file for printing on a 3d printer slice to your needs/wants.
I used fusion 360 to design this model, and it is inspired by the show, "Community".
Downloads
Create 3d Sketch





So first I opened Fustion360, set units to in, and hit created sketch. Then I created a 5.407inx3in rectangle around origin. Then I made a construction line 1in above the bottom of the rectangle and used that construction line to make another just like it. After you do that create the word G R E E N D A L E in Baskervill Old Face font size .394, in a .7x5 text box, 0.2030883261 in from each edge and .2 in from the top using dimensions. In the center of the construction line that we earlier created, create a 1.4125821701 in size circle. Inside of that circle, freehand the "anis" portion. (This will take a little bit so take your time and make sure its centered and the words around the circle). Now trim it up, and your done with the first step.
Extruding






Extrude the "base" of the flag .25in tall. Then hit show sketch and extrude the word "greendale" to .3in. After that extrude the outline of the "anus" and "e plurimus anus to .3in. Then extrude the "anus" to .25in. Finally, fillet the outer edges to .05in.