Green Flashlight
plastic bottle Flashlight
Supplies
- Spare halogen lamp
- Battery spring
- Resistor
- AAA x 3 batteries
- battery holder and conductor
- Plastic bottle
- hot glue gun
- scissors
- switch on/off
- sharpie
Weld the resistor with one side of the LED, and the other side on the switch, weld the other side of the LED with the battery spring creating a circuit
Draw and cut the bottle in the 3 pieces shown in the images.
With the pieces you cut, glue the longer one together to create a cylinder shape and then glue it to the top piece (head of the bottle) to make the flashlight shape, finally cut a hole the size of your switch.
Glue the circuit inside the flashlight and make sure the battery spring and the switch are touching the + and - parts of the battery holder
LIGHT IT UP!!!