Glue 3d Printing

now i've always been interested in 3d printing and this is how i copied the concept of 3d printing into an affordable thing

below is one of the things that i made following this process

all you need to do this project is a glue gun and plenty of glue sticks depending on creation

and you also need a mat or a piece of paper

and last a water sprayer

you might want to do this outdoors since it makes a water mess

the first thing i tried was make stalagmite (if you dont know what this is then look it up)

you need a base make the base first then add layers

make sure your spraying the glue with water seconds after its out of the glue gun to harden it fast and get the desired shape.

after building up you will get something that looks like this

and using this concept you can make anything

i made a pyramid using this concept

i also made a flower in a pot

1. NOTE THAT YOU NEED TO SPRAY THE GLUE AFTER IT COMES OUT WITHIN SECONDS NOT INSTANTLY OR ELSE YOU WILL GET SOME PARTS TO NOT STICK TOGETHER.

2. ALWAYS MAKE OTHER STUFF AND DESIGNS USING YOUR MISTAKES SO IF YOU DO SOMETHING WRONG WITH SOMETHING TRANSFORM IT INTO ANOTHER THING YOU NEVER KNOW WHERE YOU CAN FIND CREATIVITY.

3.VOOOOOOOOTE