Glowing Wind Mill

Makers: Naveen,Bharath

Location:E4d Banjarapalya Makerspace

We made this "Glowing Wind Mill" for the Instructables build night on Chibitronics-

Circuit Stickers.

It is a simple windmill drawing with blinking LEDs.

Materials;

Copper tape

A4 Sheets

color pencils,

circuit stickers - Blink effect sticker, 3 LEDs

First draw the picture using pencils And color pencils.

After coloring, the drawing looked like this. Use colors that you like. However, maintain a light tone so that the LED light from below is clearly visible.

Take a copper tape And stick it in the A4 sheet as shown in the picture.

Take the LED stickers and the Blink Effect Sticker and place it in the circuit as seen in the picture.

After finishing, it looks like this.