Glowing Bracelet

Create your own Glowing Bracelet, that is magnificient, simple and easy to build.

Here are the materials required:

Beads

Buttons

Thread

LED Strip

CR2025/CR2035 or 2X AA 1.5V Batteries

Connecting wires

Paper

Glue and Tape

Scissors

Gather all the required materials.

Pass the thread through each eyelet of the beads. Arrange them into 2 rows with equal number of beads. Tie a knot at one end of the thread, so that beads don't slide away.

When equal number of beads are on one side, pass the thread through the black button and then continue to thread through the beads again. Finally, tie a knot at the other end too, so that the beads stay in place.

Cut a piece of LED strip that is equal to the length of the bracelet. Power the LED strip using coin cell or AA batteries using connecting wires.

Put a layer of white paper on the LED strip, to have a diffused illumination. Then, fix it onto the bracelet using tape as shown.

Here's the completed glowing bracelet.

You can customize the bracelet size and can include LED colours of your choice!