Gloving Flower LED

by deepak_e4d in Circuits > LEDs

418 Views, 1 Favorites, 0 Comments

Gloving Flower LED

IMG_20150706_194929.jpg
2015-06-04-084746.jpg

Maker : Deepak
Location : Banjaraplya E4D Makerspace

I did this gloving flower LED in Banjaraplya E4D Makers pace.

Material:

  1. LEDs
  2. Wires
  3. paper
  4. Battery holder and battery
  5. Switch

Tools

  1. Electric tape
  2. Solder

Make the Flower

2015-07-07-185252.jpg

Make the flower has shown in image.

Fix the Wires to Battery

2015-07-07-184323.jpg
2015-07-07-184344.jpg

Fix the wires to battery has shown in image.

Put the Switch

2015-07-07-185222.jpg

Put the switch has shown in image.

Fix the LED

2015-07-07-185316.jpg

Fix the LEDs to the wires has shown in the image.

Put the LEDs Into Flower

2015-07-07-193028.jpg

Put the LEDs into the hole in the flower has shown in image.

Finally My Project

IMG_20150706_194922.jpg

Finally my project is finish and it look like this.