Glass Replacement - Wood
by sailing.schrader in Workshop > Laser Cutting
952 Views, 6 Favorites, 0 Comments
Glass Replacement - Wood
In this Instructable, I'll show you how I improved the look of my cracked phone. I have a moto Z play and I dropped it :(.
The screen broke into small shards at the top bezel. After a few weeks the small glass shards came off, so I replaced the top bezel with a piece of bamboo wood.
After the hack, my smartphone got a unique design. I love it :)
You can apply this hack also to the backside of a phone.
For this hack you will need:
- a thin piece of wood (0.4-0.8mm) I used a thin veneer
- double sided Tape (thin) you can also use liquid glue
- access to a Laser Cutter
Remove All Shards of Glass
At first, I removed all shards from the surface you want later cover with wood. It can be helpful to use a hot air gun to warm up the adhesive. Be careful behind the glass can be cables or electric components which you shouldn't damage.
Take a Photo
After cleaning the surface I took a photo of your phone. It is important that you take the photo vertical to the screen so that everything is parallel in the picture.
Create the Drawing
I used Inkscape to draw a line along the border of the area. I created cut-outs for the speaker, the camera, and the sensors.
Skale the Drawing
Now we have to scale the outline to the right dimensions.
Lasercut the Design
I laser cut the design, but before you should measure the thickness of the glass you want to replace so that you can choose the right thickness of the wood.
Assembly
Hopefully, everything fits together. With double sitted tape, you can attach the wood piece to the phone.