Giant Tool Chest

I just made giant a tool box in tinker cad and it has two layers of tool storage inside. Two hinges on the back and the clip on the front to open it.

This was designed in tinker cad but if you were to build it you will need wood, saw, measuring tape ,pencil, drill, nails and a hammer.

I started with just a basic rectangle as you can see in the picture

Step two I started by adding the clip and the hinges as you can see in these two pictures. To add the clip you just drag it from the basic shapes category size it to 3.00 and 1.00 and then add it to your rectangle and for the hinges you size it to 20.00 and 1.00.

In step three I started two build the inside by making a hole in the box to start the first layer and I also added the two handles to lift up the second layer.

Step four I made a hole under the first layer so I could make the main compartment so you can put all of your tools.

For step five our last step you just add this little separator and your done.