Giant Smart Watch Replica
by Rohan ice droon in Craft > Cardboard
175 Views, 0 Favorites, 0 Comments
Giant Smart Watch Replica
![WhatsApp Image 2022-06-21 at 11.07.45 AM.jpeg](/proxy/?url=https://content.instructables.com/F4Q/SZEE/L4MR406J/F4QSZEEL4MR406J.jpg&filename=WhatsApp Image 2022-06-21 at 11.07.45 AM.jpeg)
![WhatsApp Image 2022-06-21 at 11.05.38 AM.jpeg](/proxy/?url=https://content.instructables.com/FZ8/WVU9/L4MR406T/FZ8WVU9L4MR406T.jpg&filename=WhatsApp Image 2022-06-21 at 11.05.38 AM.jpeg)
This instructable will guide you in making a large smart watch prop. Let's Start.
Supplies
To start off, gather the following supplies:
- Chart Paper
- Empty Box
- Scissors
- Tape/Glue
- Sketch Pens
- Additional Stickers for Wall-Paper
Cover the Box
![WhatsApp Image 2022-06-21 at 11.07.44 AM (2).jpeg](/proxy/?url=https://content.instructables.com/FGZ/EWA6/L4MR406R/FGZEWA6L4MR406R.jpg&filename=WhatsApp Image 2022-06-21 at 11.07.44 AM (2).jpeg)
Use the chart paper to cover the box from all sides. This can be done using tape or glue. Tape will lead to a less messy situation and therefore is recommended.
Colour the Box
![WhatsApp Image 2022-06-21 at 11.07.44 AM (1).jpeg](/proxy/?url=https://content.instructables.com/FCC/UDVD/L4MR406Q/FCCUDVDL4MR406Q.jpg&filename=WhatsApp Image 2022-06-21 at 11.07.44 AM (1).jpeg)
Start colouring the top. You can use paint or sketches to do the black screen of the smart watch. Then finish it off with a contrasting shade to mark the boundaries.
Design Your Screen
![WhatsApp Image 2022-06-21 at 11.07.44 AM.jpeg](/proxy/?url=https://content.instructables.com/FKJ/NNAW/L4MR406H/FKJNNAWL4MR406H.jpg&filename=WhatsApp Image 2022-06-21 at 11.07.44 AM.jpeg)
You can use paper to make the time on the screen. You can have creative liberty to design it like you want it to be.
Make the Straps
![WhatsApp Image 2022-06-21 at 11.07.43 AM (2).jpeg](/proxy/?url=https://content.instructables.com/F58/Y8BB/L4MR406O/F58Y8BBL4MR406O.jpg&filename=WhatsApp Image 2022-06-21 at 11.07.43 AM (2).jpeg)
Cut straps with the width of that of the smart watch. You have to punch holes on one of the straps and attach a pointed piece of paper at the tail of another.
It's Done!
![WhatsApp Image 2022-06-21 at 11.07.42 AM (2).jpeg](/proxy/?url=https://content.instructables.com/FNL/47RU/L4MR406L/FNL47RUL4MR406L.jpg&filename=WhatsApp Image 2022-06-21 at 11.07.42 AM (2).jpeg)
![WhatsApp Image 2022-06-21 at 11.05.32 AM.jpeg](/proxy/?url=https://content.instructables.com/FVM/4X75/L4MR406S/FVM4X75L4MR406S.jpg&filename=WhatsApp Image 2022-06-21 at 11.05.32 AM.jpeg)
![WhatsApp Image 2022-06-21 at 11.07.43 AM (1).jpeg](/proxy/?url=https://content.instructables.com/F0J/FTAM/L4MR406N/F0JFTAML4MR406N.jpg&filename=WhatsApp Image 2022-06-21 at 11.07.43 AM (1).jpeg)
Here are the final results. Image attached shows the scale of that of the watch we built to an actual size.
Now go on and unleash your creativity!!