Giant Eyeball

This procedure will show you how to make a giant eyeball for a prop. Read the steps below and enjoy!
Gather Paints

Take the colors of dark blue, light blue, green, white, and black. Make sure the paint is acrylic paint.
Take Foam Ball

Get a 10 inch foam ball for the eye.
Take Elmer's Glue

Get some Elmer's glue. This will mix with the paint, so it will stick to the foam.
Mix Paint and Glue

Next, mix the white acrylic paint with the Elmer's glue.
Paint the Ball

Paint the eye ball completely with the white paint and Elmer's glue.
Dry the Eyeball

Put the eyeball in front of a fan or hair dryer, to dry the eyeball completely.
Mix Black Paint and Glue

Next, mix the black acrylic paint with the Elmer's glue, just like you did before.
Get a Half Foam Ball

Take a foam ball and cut it in half.
Paint Half Foam Ball

Take the black paint mixed with the glue and paint it into the half foam ball for the pupil.
Draw a Circle for the Iris

After the big foam ball has dried, draw a circle around the center of the ball for the iris.
Take Dark Blue Acrylic Paint

Take the dark blue acrylic paint and put it on the plate for the iris.
Paint the Iris

Take the dark blue acrylic paint and paint the circle that you drew. (iris)
Dry the Iris

Next, put the foam ball in front of the fan to dry it completely.
Take Light Blue Paint

Take the light blue acrylic paint and put it on a plate.
Design the Iris

Take the light blue acrylic paint and crate a design on the iris just like the picture shown.
Dry the Iris

Just like done before, dry the iris.
Last of the Colors Needed

Take the colors shown in the picture above, and separate them on a plate.
Last Designs

Then, create a design on the iris with the colors you have. Make sure it looks realistic.
Black Half Foam Ball

Then, take the black half foam ball that you made earlier.
Hot Glue Half Foam Ball Onto Eyeball

Next, put hot glue on the bottom of the foam ball and stick it in the middle of the iris.
Finish Product

Lastly, there is your finish product.