How to Make a Wind Turbine

Hello everyone, here I will present for you a creative idea of generating electricity by using a wheel. Briefly, in this project I mix between the past and the present by merging the old wooden form of a wheel with the modern generating system which mainly based on the renewable resources of the nature like wind and water(winter).

The basic element in my project is the wooden wheel that causes the rotational motion of the dynamo and generates electricity, and here we deduce the importance of the circular shape of the wheel in a totally different from what we know that it is used for transportation in cars,bicycle....

So, many things in our life have different uses that can be useful for us.

Materials:

• sticks of wood
• wooden rods
• dynamo
• lamp
• wire

• faucet

• plastic paper
• rubber rings

Tools:

• drill
• hole saw bit 2''=51mm
• glue gun
• marker
• electric scotch
• spray

• tools

Using a drill saw 2 wooden circles of daimeter 2"

Glue the sticks to the circular center, by adding 8 sticks in each side and each pair is

collinear.

add each terminal of a stick to it's parallel terminal in the other side.

add another stick between each consecutive diagonals.

using a spray paint the wheel in the color that you want.

put the dynamo in the center of the wheel.

add rubber rings to prevent access of dust or wires to the dynamo rod.

Cut the plastic papers of size 20/16 cm.

add a plastic paper on each of the 8 rods.

band the dynamo with the stand.

wire the dynamo with the lamp.

Here the wind was the source that the generator depends on to light the lamp. the lamp lighting depends on the force of the wind or rain.

add a faucet to a gallon to collect water for plants by putting it under the project if the weather was rainy so that will also generates electricity by the force of rain.