Generating GCode With Inkscape and MakerCAM [My DIY CNC Adventure Pt. 3]

by WinstonMakes in Workshop > CNC

19956 Views, 70 Favorites, 0 Comments

Generating GCode With Inkscape and MakerCAM [My DIY CNC Adventure Pt. 3]

Screen Shot 2014-01-23 at 7.31.13 PM.png
Going over one method of engraving a 2D design with a CNC. This is my third video as I learn to use my Shapeoko 2 DIY CNC from Inventables.