Gearbest Laser Engraver - Review and How to Use It With Laserweb3
by JordsWoodShop in Workshop > Laser Cutting
3286 Views, 17 Favorites, 0 Comments
Gearbest Laser Engraver - Review and How to Use It With Laserweb3
Gearbest reached out to me and asked if I would be interested in reviewing on of their laser engravers, a free laser? how could I not?!?
well as you will see in the video review, it was off to a bumpy start with no instructions or real support, but after a few days of searching the internet it turned out to be a pretty good unit considering the price.
Now if you are interested in purchasing this laser, use this link below and use coupon code "DIYViolet" at checkout for a discount.
Get the same Laser: https://goo.gl/mA8T8W
Check out other Gearbest products: https://goo.gl/V7EtK7
The Review
 (Banggood))
In this video we're starting to review our new A3 Laser Engraver from Gearbest.
Links:
Use Coupon Code "DIYViolet" at checkout to receive a discount.
Get the Laser: https://goo.gl/PrRB8z
Check out Gearbest: https://goo.gl/PrRB8z
Assembly Instructions: https://goo.gl/PrRB8z
Software Links:
t2 laser: http://download.cnet.com/T2Laser/3000-2130_4-7647... (requires pin change, detailed in the next video)
Xloader: http://download.cnet.com/T2Laser/3000-2130_4-7647...
LaserWeb3: http://download.cnet.com/T2Laser/3000-2130_4-7647...
Useful Forum: http://benboxlaser.us/
In the next video we will learn how to use this laser with Laserweb3 and T2 Laser
Become a JWS Patron and help support the show:
http://www.patreon.com/Jordswoodshop
Show Sponsor:
Getting Your Laser to Work With LaserWeb3
)
In this video I show you how to get your cheap Chinese laser engraver to work with a decent software called LaserWeb3.
Links:
Arduino IDE: https://goo.gl/yPNVju
XLoader: https://goo.gl/iXAic
GRBL HEX file: https://goo.gl/iXAic
Java: NOTACTUALLY NEEDED
LaserWeb3: https://goo.gl/iXAic
Laserweb settings:
X-length - 400
Y-length - 300
Laser Dia - 0.5
SVG DPI - 72
(G-code)
Start G code - G28
Laser On - M3
laser Off - M5
PWM Max - 255
Home Sequence - G28
End G Code - M30
Get This Laser:
Use Coupon Code "DIYViolet" at checkout to receive a discount.
Get the Laser: https://goo.gl/mA8T8W
Check out Gearbest: https://goo.gl/mA8T8W
Assembly Instructions: https://goo.gl/mA8T8W
Become a JWS Patron and help support the show: http://www.patreon.com/Jordswoodshop