Gear Box
Gear Box
Supplies
You need the website tinkercad.com
Need in that are-
5 boxes, TEXT, and a snap-fit gear (found in Hardware)
Create a New Design
You need to create a new Design to get started
Create the Side Walls of the Box
You need to grab 4 boxes. 1st box would need to be Radius-0 Steps-10 Length-20 Width-20 Height-30 (Increase the sides to the end) then put it on one side of the Box and make it the last brown in the colors. Then, for the 2nd do the same thing exact thing but put it on the other side of the 1st one. Next, the 3rd box will need to be the exact same but on a different side the box. Finally, 4th box would be the same as the other but would be across from the 3rd box.
Make the Floor
Now the 5th box has to be Radius-0 Steps-10 Length- 20 Width- 20 Height- 4. You need to increase the sides by 180 and the other side should be 182 and make it the last brown in the colors.
Put the Gear in the Box
Grab the Snap-fit gear from Hardware and put it in the box and Increase it to make the gear be in the hold box.
Grab the Text
Grab the text and put it on the top of the box and write "Gear Box" then change the color to the middle before black. Congrats you have made a gear box.