Gas Canister Sleeve
![[Leather Craft] Making a Gas Canister Leather Pouch (X-stitched)](/proxy/?url=https://content.instructables.com/FIX/3CL1/JKCUHKLF/FIX3CL1JKCUHKLF.jpg&filename=[Leather Craft] Making a Gas Canister Leather Pouch (X-stitched))
How I make a gas canister sleeve
I hope, It is helpful by this flowing steps.
Make a Pattern for Leather and Cut
Only two types of patterns are needed.
One is a donut shape and the other is a rectangle.
Cut Leather for Upper Parts in a Circle
I used a special tool.
Is called a Circle cutter.
It doesn't matter if you cut it yourself.
Edge Creasing on Leather / Prepare for Sewing
I used a divider.
Punch
I used a divider to adjust the spacing.
Important : the number of holes in both patterns should be the same.
In my case, there were 45.
X-stitcing on Leather
One line looked so weak that it sewed two lines at the same time.
Joining the Top and Side Parts
Put the top and the bottom together.
Cross Stitch From Beginning to End
Pay attention to the shape and spacing of the stitch.
Done!
Simple props were created.