Garage Parking Stop Sign

Park your car without worry.

1 ten foot piece of 1/2 inch pvc pipe

4- 1/2 inch pvc caps

3- 1/2 inch pvc t's

Pipecutter or hacksaw

pvc cement if you want it

Cut (6) six inch sections for the base. Build the base according to diagram. The remaining 7 feet of pipe cut as tall as you like 4 or 5 foot should be more than fine.

I just shot 2 marks of black paint on the concrete where I wanted the back leg caps to sit on. It's too cold now, but in the summer I plan to paint the stand a bright red.

Will not prevent this however ;)