Game Blanket
![IMG_1783.JPG](/proxy/?url=https://content.instructables.com/FF7/D70G/JPINYJPU/FF7D70GJPINYJPU.jpg&filename=IMG_1783.JPG)
This is a game design project. Every square has an LED and a soft switch under it. At the beginning of the game, 3 LEDs will be turned on, and then the users need to use their body parts to trigger the 3 squares. After that, more LEDs will be turned on, so the users need to be flexible enough to cover as many squares as possible.
Cut the Foam and the Fabric
![IMG_1781.JPG](/proxy/?url=https://content.instructables.com/FSE/VIHT/JPINYJQ6/FSEVIHTJPINYJQ6.jpg&filename=IMG_1781.JPG)
Make sure the size is appropriate for users of different heights. And cut a small hole on every foam to make the soft switch.
Cut Some Conductive Material
![IMG_1780.JPG](/proxy/?url=https://content.instructables.com/F5Y/MGQ2/JPINYJQA/F5YMGQ2JPINYJQA.jpg&filename=IMG_1780.JPG)
Attach conductive material on both sides of fabrics. And connect them into the circuit.
Sew the LEDs
![IMG_1782.JPG](/proxy/?url=https://content.instructables.com/F0F/FKF7/JPINYJQ1/F0FFKF7JPINYJQ1.jpg&filename=IMG_1782.JPG)
Put the LEDs on the corner of every square and sew them.
Test the Soft Switch
Downloads
Sew the Two Pieces of Fabric Together
![IMG_1778.JPG](/proxy/?url=https://content.instructables.com/FAT/Y9X2/JPINYJQM/FATY9X2JPINYJQM.jpg&filename=IMG_1778.JPG)