Galaxy Printed Phone Case

In this tutorial you'll learn how to make a galaxy printed phone case.

It's very simple and you really don't need to follow any RULES at all.

This is a very easy way customize an old boring phone case.

For this project you'll need.

1. Blank Phone Case
2. Lots of nail polishes.
3. Nail Polish Remover
4. Sponge
5. Paint Brush
6. Glitter Glue

Place the the case over a polythene sheet.

Use nail polish remover or any kind of glass clean to clean the case. I've used a small piece of sponge to clean it.

Take the nail polish you want to apply first and also cut out a small piece of sponge.

Pour a bit of nail polish on the sponge.

Then smudge it on the case.

Now take another color and pour it on the sponge. I've used different pieces of sponge for different colors.

Now smudge this one like we did previously. It doesn't has to be very neat. It should look like smoke or clouds.

Now take a glittery nail polish, this will be the milky-way.

Pour few drops on the blank area.

Then use a sponge to spread it and make it smooth.

Apply a bit of lighter color on the edge of darker color to add some more detail to it.

I've used a tiny smudge of green on one corner to make it look more galaxy looking.

Take a silver glitter glue.

Apply tiny dots all over the case.

Take a bit of silver nail polish on a sponge.

Smudge it on the blank areas, and also a bit over the other colors.

If you want a bit more detail, use a paint brush and white nail polish to draw tiny stars. Now leave it over 8-10 hours to dry. I left it for a whole day to dry.