GPS Cup Holder Mount

I wanted a place to mount my GPS other than the dashboard or windshield so I came up with a simple & easy way to mount it in the cup holder with no screws or bolts.

All that's needed is a 2" PVC female coupler, a piece of 1/8" plexiglass (size 3.5 "x 4.5"), some industrial strength adhesive or strong glue & some sandpaper.

Next, lightly sand the edges of the piece of plexiglass, corners too.

Carefully add glue to the edge of the coupling & set the piece of plexiglass on top. You don't need to press too hard, just give it light pressure to the top. I glued it off to one side so I can turn the mount around being I have a tight space where my cup holder is. This way you have more area for the suction cup to adjust for your specific vehicle.

After the glue sets up, install in cup holder. Attach suction cup to the mount & adjust your GPS. That's it!! Note- The black mount that's in my truck is one that I made a while back. I thought it looked better than grey. You can use a black ABS coupling if you want. I just wanted to show how to make these. Enjoy!