GORKEM'S KNEX CROSSBOW (WITH SOME MODS BY ME)
by Danny in Living > LEGO & K'NEX
9235 Views, 13 Favorites, 0 Comments
GORKEM'S KNEX CROSSBOW (WITH SOME MODS BY ME)
well first id like to say, gorkem gave me permission to do this.
ok this is the most powerfull crossbow ive made, infact its the most powerfull gun ive made so erm i suggest building it
i have added a few mods into it because it makes it perform better
*anyone who notices punctuation and spelling mistakes could you kindly point them out =D*
ok this is the most powerfull crossbow ive made, infact its the most powerfull gun ive made so erm i suggest building it
i have added a few mods into it because it makes it perform better
*anyone who notices punctuation and spelling mistakes could you kindly point them out =D*
First Step on Your Way to the Crossbow
picture 1: put 5 red connecters on a black/strenthened rod
picture 2,3 and 4: add a yellow connecter just like the red and put 2 red rods on either side, then add 9 yellow connecters through the hole like a skewer arranging them like the picture shows after you have done that add green rods to the yellows and then clip a white connecter on to keep them in place, add 4 more yellows and another green rod to the first one and then add a dark grey connecter then another white connecter
*phew*
picture 2,3 and 4: add a yellow connecter just like the red and put 2 red rods on either side, then add 9 yellow connecters through the hole like a skewer arranging them like the picture shows after you have done that add green rods to the yellows and then clip a white connecter on to keep them in place, add 4 more yellows and another green rod to the first one and then add a dark grey connecter then another white connecter
*phew*
Meh, This Is Easy
pic 1: make this thingy mabob
pic 2: thats where u attach
pic 2: thats where u attach
In This Step U Make the Barrel and Attach to the Frame
pic 1: make this thingy at the end of a strenghthened grey lengh rod
pic 2: make this at the other end
pic 3: connect it like this
pic 4: make sure u add the trigger
pic 2: make this at the other end
pic 3: connect it like this
pic 4: make sure u add the trigger
Making the Crossbow Arms
pic 1: make the in-between layer and then make a mirror of it for the opposite arm
pic 2: make sure u do this on both sides, then u have the basic arm and remeber to do it mirrored to make the other arm
pic 3 and 4: add these to the ends
pic 5: add this to hold the rubber bands. do this on the other arm too
pic 2: make sure u do this on both sides, then u have the basic arm and remeber to do it mirrored to make the other arm
pic 3 and 4: add these to the ends
pic 5: add this to hold the rubber bands. do this on the other arm too
Connecting & Support
this is how u connect the arms to the body
pic 1: first arm connected
pic 2: both connected
the extra support
pic 3 and 4: add the red rods and slot it through where show
pic 1: first arm connected
pic 2: both connected
the extra support
pic 3 and 4: add the red rods and slot it through where show
Adding the Extra Decoration and the Top Connection/support
decoration:
pic 1 and 2: make it
pic 3: connect like this
pic 4: connected
top connection/support:
pic 5: make 2 of these
pic 6: both added
pic 7: add in the grey rods, do this on both sides
pic 1 and 2: make it
pic 3: connect like this
pic 4: connected
top connection/support:
pic 5: make 2 of these
pic 6: both added
pic 7: add in the grey rods, do this on both sides
Elastic Bands, Loading and Firin
where to add the elastic bands...
pic 1: put through the supports
pic 2: hook over the orange on both sides
pic 3: trigger
how to load...
pic 4: put the bullet in the barrel then press the trigger and the bullet will fall through
pic 5: pull back the bullet until it gets locked in with the trigger making sure the elastics are balanced on the end of the rod
how to fire!
pull trigger, simple
congrats u have made gorkems crossbow with my mods
CONGRATS!
pic 1: put through the supports
pic 2: hook over the orange on both sides
pic 3: trigger
how to load...
pic 4: put the bullet in the barrel then press the trigger and the bullet will fall through
pic 5: pull back the bullet until it gets locked in with the trigger making sure the elastics are balanced on the end of the rod
how to fire!
pull trigger, simple
congrats u have made gorkems crossbow with my mods
CONGRATS!