'Glowrious Rings' for Sale on Etsy

https://www.etsy.com/shop/GLoWrIoUsRiNgS?ref=hdr_shop_menu

Gather Supplies

Things you will need:

Materials:

1. Wood

2. Epoxy

3. Mixing cups and sticks

4.Glitter

5.Clear coat

Tools:

1.Table saw/Miter saw

2.Drill with spade bit

3.Belt sander

4.Dremel with sanding drum

5. Sandpaper

6.Whole human body (for tools to use)

Cut Thin Strips of Wood

Use a table saw or miter saw to cut two 1/8" thin strips of each species of wood.

Mix Epoxy With Glitter

Add chosen glitter to a mixing cup and set aside. Begin to mix 2 part epoxy in separate cups. Once thoroughly mixed, add the resin to your glitter and stir.

Pour Resin Over Wood

Lay wood strip on designated flat surface and pour resin, spread if necessary, covering the surface area. Let stand for a couple minutes to slightly cure and hold shape. Lay matching wood strip over top and let stand to cure overnight.

Drill Hole

Once cured, drill a hole using a 5/8" or 11/16" spade bit.

Cut to Size

Then using a table saw or miter saw, cut about 1/4" to the side of the hole that was drilled.

Rough Shape

Using a belt sander, grind down all the corners to evenly shape a circle the best you can.

Sand With Dremel

Now that you have the shape of a circle, attach ring to dremel using a 1/4" drum. Use tape or cloth if needed to ensure it fits snugly. Begin slowly spinning ring, sanding from 60 grit, up to 400 grit, to achieve desired shape.