Futuristic Martian Tree Sculpture Made With Aluminium Poured in to Orbeez
by CrazySurvivalSt in Craft > Art
1942 Views, 6 Favorites, 0 Comments
Futuristic Martian Tree Sculpture Made With Aluminium Poured in to Orbeez
I end up with a Mars bonsai tree sculpture made by pouring molten aluminium in a bucket full of Orbeez.
This statue is very easy and you can make it if you have a foundry.
Pour a Bag of Orbeez on a Bucket of Water
Pour a bag of orbeez on a bucket of water
Wait 3 Hours and Give Time the Orbeez to Grow
Wait 3 hours and give time the Orbeez to grow
Melt Some Aluminium on the Foundry
Melt some aluminium on the foundry
Pour the Molten Aluminium in to the Bucket
Pour the molten aluminium in to the bucket
Remove the Aluminium From the Bucket
Remove the aluminium from the bucket and remove the orbeez
Make a Basement of About 12x12 Cm
Make a basement of about 12x12 cm, draw it on a piece of wood
Saw the Basement
Saw the basement
Sand the Basement With 300
Sand the basement with 300 sandpaper
Make a Hole in the Basement
Make a hole in the basement and also on the aluminium statue
Varnish the Basement
Varnish the basement
Use an Screw to Hold the Statue
Use an screw to hold the statue on the basement