Funko POP Forky in a Box

by darcy3529 in Craft > Costumes & Cosplay

634 Views, 1 Favorites, 0 Comments

Funko POP Forky in a Box

86210FA7-BE86-4647-9223-8CAE3B2AA076.jpeg
This is a cardboard costume. It is very eay and inexpensive to make.

Supplies

Cardboard
Hot glue and gun
Paint: white, black , blue, red, yellow snd brush
Prints of “POP” and “TOY STORY 4”
Heavy duty scissors and box cutter
Headband
Belt or rope
Ruler

Box

C4AE92DF-5D95-402C-A7F3-AD66E6916A60.jpeg
3D8CA583-8FDE-4420-A6FF-309E40200017.jpeg
07D69427-BFCC-4A32-BED6-5E56D53A3567.png
7EFEAA17-1607-46D4-8F92-E4311782E42C.jpeg
D2D62C84-7E6D-4FF6-836B-23E30A55D87A.jpeg
B65B89D3-2A0D-4310-8AC5-A2C7E5D801FF.jpeg
5ADF94DC-62B7-4C4C-ACB0-6DFDDDA4DA49.jpeg
You will need a box large enough for the wearer to stand in.
Cut away one corner of the box . Measure 4 inches from the edge.
Paint box white on the outside and black on the inside.
Draw straight lines one inch from the edges and 3 inches from the edges.
Paint blue inside the lines.
Print out “POP” and “TOY STORY 4” images. Cut out the images and glue to the box.
Make 2 Forky masks from cardboard. The masks need to be large enough to cover the wearer from head to waist.
Draw and paint on the facial features.
One mask:
When dry turn the mask over and make eye holes . Glue a headband to the cardboard about an inch above the eye holes.
Second mask:
Cut in half from top to bottom. Cut a rectangle and paint it white for the neck. Glue the neck and half mask to the bottom of the left side.


Make the Body

C8ACD433-99A3-4D4A-BB39-C9A77D52645B.jpeg
The body of Forky is made from cardboard.
Cut out the body so it is a few inches wider than the wearer. Paint the fork white and the feet a mix of white and yellow. Paint the arms red.
After the body dries turn over and glue a belt or rope to the back at the waistline of the wearer.
You’re ready to go! Enjoy your costume!